UPS LP Series 5-6-8-10-15-20 kVA

Uninterruptible power sources of LP series with single-phase output manufactured by GE Digital Energy are hi-tech systems providing protection of wide range critical load power supply. 

  •  [ 190 Kb ] 
  •  [ 190 Kb ] 
UPS LP Series 3-20 kVA LP 5, 11, 31T, LP 6, LP 8, LP 10, LP 15, LP 20, ups, power supplies, apc, UPS, UPS, uninterruptible power supply, uninterruptible power supplies, ups ups , ups, uninterruptible power supplies UPS, ups apc, power supply ups, uninterr

UPS LP feature simplicity of installation what makes them an ideal solution for office applications. The reliability of structure allows using UPS LP in industrial conditions also.

The UPS of LP Series of the VFI Class (Voltage & Frequency Independent) are intelligent devices of increased reliability with double conversion (on-line). Use of this topology makes it possible to protect maximum protection level even in the most heavy-load conditions.

The unique technology of the Parallel Architecture, Redundant Parallel Architecture ™ (RPA™) allows add power and improve the system reliability by means of use additional UPS units creating, therefore, the system where non-reserved are absent failure points.

UPS of LP 1131T series may operate in separate connection up to 4 devices. Models of LP31 series may not be connected in parallel.

An additional recharger device for 8A may be integrated into the base-line configuration.


Features and Benefits
  • Small dimensions, easy transporting
  • Low level of distortion at the input makes use of expensive filters or generator power overshoot unnecessary
  • Advanced technology providing almost noiseless operation
  • High output power factor makes it possible to avoid UPS power overshoot in calculations
  • Meets the strictest requirements of providing minimal distortion level of output voltage
  • Superior Battery Management System (SBM) prolongs life time of the batteries and prevent failure arising
  • ECO-mode reduces electric energy consumption in conditions of stable network
  • Monitoring and protection software 
Fields of application
  • Communications nodes
  • Computation centers and data processing and storage centers
  • Equipment for industrial processes control
  • Medical equipment and public health care establishments
  • Broadcasting and satellite communication systems
  • Transport
  • Stationary and mobile systems of voice connection systems and data transfer systems
  • Emergency alarm systems
  • Security and safety systems
  • Financial systems and services 
LP 5 - 11 / LP 5 - 31T
UPS:  Single-phase UPS
Output power at cos? = 0.6-0.8:  5kVA
Output power (kVA):  4kW
Accumulator batteries (V/Аh):  240/7
Charging rate (А):  2,0
Additional charger 8А:  +
Charging period:  1.5-3 hours till 80% of capacity
Output power factor (cos?):  0,99
Standard autonomy time at 50/100% load (min):  23/10
Output isolation transformer:  Standard equipment list
Dimensions (H х W х D):  537 х 313 х 590 mm
Noise level (dB(A)):  40-50 (EN27779) in dependence on load and temperature
Weight (kg):  110 (LP-11) / 180 (LP-31T)
Protection class:  IP20
Input voltage range (V):  172-285 (LP-11) / 340-460 (LP-31T)
Input frequency range (Hz):  40-70
Input voltage (V):  220/230/240 (selected by user)
Output frequency (Hz):  50/60 Hz (± 0,1%)
Cross-factor:  5:1
Parallel operation:  up to 4 devices
Distortion of output voltage (THD) at linear load:  <1%
Distortion of output voltage (THD) at non-linear load:  <10% max. at cross-factor 2,5:1
Output voltage constancy at static load:  ±1%
Output voltage constancy at dynamic load (alternation – 0 -100-0%):  < ±2% (recovery time < 10ms)
Overload capability of inverter:  110% - 20 min. 130% - 3.5 min. 150% - 2 min.
Environment operating temperatu:  UPS: - 10 - + 40 ? C Battery: 15-25 ? C
Humidity:  95% without condensate
Safety standards:  EN 50091-1-1; EN/IEC 60950
EMC standard:  EN 50091-2
Standard interface:  RS232, dry-type contacts
Advances batteries control:  +
Options:  RPA, SNMP-card, additional battery enclosures
LP 6 - 11 / LP 6 - 31T
UPS:  Single-phase power supply
Output power at cos? = 0.6-0.8:  6kVA
Output power (kVA):  4,8kW
Accumulator batteries (V/Аh):  240/7
Charging rate (А):  2,0
Additional charger 8А:  +
Charging period:  1.5-3 hours till 80% of capacity
Output power factor (cos?):  0,99
Standard autonomy time at 50/100% load (min):  20/8
Output isolation transformer:  Standard equipment list
Dimensions (H х W х D):  537 х 313 х 590 mm
Noise level (dB(A)):  40-50 (EN27779) in dependence on load and temperature
Weight (kg):  115 (LP-11) / 185 (LP-31T)
Protection class:  IP20
Input voltage range (V):  172-285 (LP-11) / 340-460 (LP-31T)
Input frequency range (Hz):  40-70
Input voltage (V):  220/230/240 (selected by user)
Output frequency (Hz):  50/60 Hz (± 0,1%)
Cross-factor:  5:1
Parallel operation:  up to 4 devices
Distortion of output voltage (THD) at linear load:  <1%
Distortion of output voltage (THD) at non-linear load:  <10% max. at cross-factor 2,5:1
Output voltage constancy at static load:  ±1%
Output voltage constancy at dynamic load (alternation – 0 -100-0%):  < ±2% (recovery time < 10ms)
Overload capability of inverter:  110% - 20 min. 130% - 3.5 min. 150% - 2 min.
Environment operating temperatu:  UPS: - 10 - + 40 ? C Battery: 15-25 ? C
Humidity:  95% without condensate
Safety standards:  EN 50091-1-1; EN/IEC 60950
EMC standard:  EN 50091-2
Standard interface:  RS232, dry-type contacts
Advances batteries control:  +
Options:  RPA, SNMP-card, additional battery enclosures
LP 8 - 11 / LP 8 - 31T
UPS:  UPS Single-phase
Output power at cos? = 0.6-0.8:  8kVA
Output power (kVA):  6,4kW
Accumulator batteries (V/Аh):  240/12
Charging rate (А):  3
Additional charger 8А:  +
Charging period:  1.5-3 hours till 80% of capacity
Output power factor (cos?):  0,99
Standard autonomy time at 50/100% load (min):  26/11
Output isolation transformer:  Standard equipment list
Dimensions (H х W х D):  680 х 313 х 720 mm
Noise level (dB(A)):  40-50 (EN27779) in dependence on load and temperature
Weight (kg):  165 (LP-11) / 270 (LP-31T)
Protection class:  IP20
Input voltage range (V):  172-285 (LP-11) / 340-460 (LP-31T)
Input frequency range (Hz):  40-70
Input voltage (V):  220/230/240 (selected by user)
Output frequency (Hz):  50/60 Hz (± 0,1%)
Cross-factor:  5:1
Parallel operation:  up to 4 devices
Distortion of output voltage (THD) at linear load:  <1%
Distortion of output voltage (THD) at non-linear load:  <10% max. at cross-factor 2,5:1
Output voltage constancy at static load:  ±1%
Output voltage constancy at dynamic load (alternation – 0 -100-0%):  < ±2% (recovery time < 10ms)
Overload capability of inverter:  110% - 20 min. 130% - 3.5 min. 150% - 2 min.
Environment operating temperatu:  UPS: - 10 - + 40 ? C Battery: 15-25 ? C
Humidity:  95% without condensate
Safety standards:  EN 50091-1-1; EN/IEC 60950
EMC standard:  EN 50091-2
Standard interface:  RS232, dry-type contacts
Advances batteries control:  +
Options:  RPA, SNMP-card, additional battery enclosures
LP 10-11 / LP 10-31T
UPS:  Single-phase UPS
Output power at cos? = 0.6-0.8:  10kVA
Output power (kVA):  8kW
Accumulator batteries (V/Аh):  240/12
Charging rate (А):  3
Additional charger 8А:  +
Charging period:  1.5-3 hours till 80% of capacity
Output power factor (cos?):  0,99
Standard autonomy time at 50/100% load (min):  20/8
Output isolation transformer:  Standard equipment list
Dimensions (H х W х D):  680 х 313 х 720 mm
Noise level (dB(A)):  40-50 (EN27779) in dependence on load and temperature
Weight (kg):  170 (LP-11) / 275 (LP-31T)
Protection class:  IP20
Input voltage range (V):  172-285 (LP-11) / 340-460 (LP-31T)
Input frequency range (Hz):  40-70
Input voltage (V):  220/230/240 (selected by user)
Output frequency (Hz):  50/60 Hz (± 0,1%)
Cross-factor:  5:1
Parallel operation:  up to 4 devices
Distortion of output voltage (THD) at linear load:  <1%
Distortion of output voltage (THD) at non-linear load:  <10% max. at cross-factor 2,5:1
Output voltage constancy at static load:  ±1%
Output voltage constancy at dynamic load (alternation – 0 -100-0%):  < ±2% (recovery time < 10ms)
Overload capability of inverter:  110% - 20 min. 130% - 3.5 min. 150% - 2 min.
Environment operating temperatu:  UPS: - 10 - + 40 ? C Battery: 15-25 ? C
Humidity:  95% without condensate
Safety standards:  EN 50091-1-1; EN/IEC 60950
EMC standard:  EN 50091-2
Standard interface:  RS232, dry-type contacts
Advances batteries control:  +
Options:  RPA, SNMP-card, additional battery enclosures
LP 8 - 31
UPS:  Single-phase power supply
Output power at cos? = 0.6-0.8:  8kVA
Output power (kVA):  6,4kW
Accumulator batteries (V/Аh):  2 х 240/7
Charging rate (А):  2 х 2,1
Additional charger 8А:  +
Charging period:  1.5-3 hours till 80% of capacity
Output power factor (cos?):  0,95
Standard autonomy time at 50/100% load (min):  35/14
Output isolation transformer: 
Dimensions (H х W х D):  1190 х 410 х 890 mm
Noise level (dB(A)):  40-50 (EN27779) in dependence on load and temperature
Weight (kg):  250 (7 Ah batareї.) - 355 (batareї 14 Ah.)
Protection class:  IP20
Input voltage range (V):  3 x 300...470 + N
Input frequency range (Hz):  46 - 65
Input voltage (V):  220/230/240 (selected by user)
Output frequency (Hz):  50/60 Hz (± 0,1%)
Cross-factor:  5:1
Parallel operation:  -
Distortion of output voltage (THD) at linear load:  <1%
Distortion of output voltage (THD) at non-linear load:  <5%
Output voltage constancy at static load:  ±1%
Output voltage constancy at dynamic load (alternation – 0 -100-0%):  < ±2% (recovery time < 10ms)
Overload capability of inverter:  120% - 10 sec., 150% - 2 sec.
Environment operating temperatu:  UPS: - 10 - + 40 ? C Battery: 15-25 ? C
Humidity:  95% without condensate
Safety standards:  EN 50091-1-1; EN/IEC 60950
EMC standard:  EN 50091-2
Standard interface:  RS232, dry-type contacts
Advances batteries control:  +
Options:  RPA, SNMP-card, additional battery enclosures
LP 10-31
UPS:  UPS Single-phase
Output power at cos? = 0.6-0.8:  10kVA
Output power (kVA):  8kW
Accumulator batteries (V/Аh):  2 х 240/7
Charging rate (А):  2 х 2,1
Additional charger 8А:  +
Charging period:  1.5-3 hours till 80% of capacity
Output power factor (cos?):  0,95
Standard autonomy time at 50/100% load (min):  34/10
Output isolation transformer: 
Dimensions (H х W х D):  1190 х 410 х 890 mm
Noise level (dB(A)):  40-50 (EN27779) in dependence on load and temperature
Weight (kg):  250 (7 Ah batareї.) - 355 (batareї 14 Ah.)
Protection class:  IP20
Input voltage range (V):  3 x 300...470 + N
Input frequency range (Hz):  46 - 65
Input voltage (V):  220/230/240 (selected by user)
Output frequency (Hz):  50/60 Hz (± 0,1%)
Cross-factor:  5:1
Parallel operation:  -
Distortion of output voltage (THD) at linear load:  <1%
Distortion of output voltage (THD) at non-linear load:  <5%
Output voltage constancy at static load:  ±1%
Output voltage constancy at dynamic load (alternation – 0 -100-0%):  < ±2% (recovery time < 10ms)
Overload capability of inverter:  120% - 10 sec., 150% - 2 sec.
Environment operating temperatu:  UPS: - 10 - + 40 ? C Battery: 15-25 ? C
Humidity:  95% without condensate
Safety standards:  EN 50091-1-1; EN/IEC 60950
EMC standard:  EN 50091-2
Standard interface:  RS232, dry-type contacts
Advances batteries control:  +
Options:  RPA, SNMP-card, additional battery enclosures
LP 15-31
UPS:  Single-phase UPS
Output power at cos? = 0.6-0.8:  15kVA
Output power (kVA):  12kW
Accumulator batteries (V/Аh):  2 х 240/14
Charging rate (А):  2 х 4,2
Additional charger 8А:  +
Charging period:  1.5-3 hours till 80% of capacity
Output power factor (cos?):  0,95
Standard autonomy time at 50/100% load (min):  30/13
Output isolation transformer: 
Dimensions (H х W х D):  1190 х 410 х 890 mm
Noise level (dB(A)):  40-50 (EN27779) in dependence on load and temperature
Weight (kg):  365
Protection class:  IP20
Input voltage range (V):  3 x 300...470 + N
Input frequency range (Hz):  46 - 65
Input voltage (V):  220/230/240 (selected by user)
Output frequency (Hz):  50/60 Hz (± 0,1%)
Cross-factor:  5:1
Parallel operation:  -
Distortion of output voltage (THD) at linear load:  <1%
Distortion of output voltage (THD) at non-linear load:  <5%
Output voltage constancy at static load:  ±1%
Output voltage constancy at dynamic load (alternation – 0 -100-0%):  < ±2% (recovery time < 10ms)
Overload capability of inverter:  120% - 10 sec., 150% - 2 sec.
Environment operating temperatu:  UPS: - 10 - + 40 ? C Battery: 15-25 ? C
Humidity:  95% without condensate
Safety standards:  EN 50091-1-1; EN/IEC 60950
EMC standard:  EN 50091-2
Standard interface:  RS232, dry-type contacts
Advances batteries control:  +
Options:  RPA, SNMP-card, additional battery enclosures
LP 20-31
UPS:  Single-phase power supply
Output power at cos? = 0.6-0.8:  20kVA
Output power (kVA):  16kW
Accumulator batteries (V/Аh):  2 х 240/14
Charging rate (А):  2 х 4,2
Additional charger 8А:  +
Charging period:  1.5-3 hours till 80% of capacity
Output power factor (cos?):  0,95
Standard autonomy time at 50/100% load (min):  24/10
Output isolation transformer: 
Dimensions (H х W х D):  1190 х 410 х 890 mm
Noise level (dB(A)):  40-50 (EN27779) in dependence on load and temperature
Weight (kg):  365
Protection class:  IP20
Input voltage range (V):  3 x 300...470 + N
Input frequency range (Hz):  46 - 65
Input voltage (V):  220/230/240 (selected by user)
Output frequency (Hz):  50/60 Hz (± 0,1%)
Cross-factor:  5:1
Parallel operation:  -
Distortion of output voltage (THD) at linear load:  <1%
Distortion of output voltage (THD) at non-linear load:  <5%
Output voltage constancy at static load:  ±1%
Output voltage constancy at dynamic load (alternation – 0 -100-0%):  < ±2% (recovery time < 10ms)
Overload capability of inverter:  120% - 10 sec., 150% - 2 sec.
Environment operating temperatu:  UPS: - 10 - + 40 ? C Battery: 15-25 ? C
Humidity:  95% without condensate
Safety standards:  EN 50091-1-1; EN/IEC 60950
EMC standard:  EN 50091-2
Standard interface:  RS232, dry-type contacts
Advances batteries control:  +
Options:  RPA, SNMP-card, additional battery enclosures
Model
LP 5 - 11 / LP 5 - 31T
UPS:  Single-phase UPS
Output power at cos? = 0.6-0.8:  5kVA
Output power (kVA):  4kW
Accumulator batteries (V/Аh):  240/7
Charging rate (А):  2,0
Additional charger 8А:  +
Charging period:  1.5-3 hours till 80% of capacity
Output power factor (cos?):  0,99
Standard autonomy time at 50/100% load (min):  23/10
Output isolation transformer:  Standard equipment list
Dimensions (H х W х D):  537 х 313 х 590 mm
Noise level (dB(A)):  40-50 (EN27779) in dependence on load and temperature
Weight (kg):  110 (LP-11) / 180 (LP-31T)
Protection class:  IP20
Input voltage range (V):  172-285 (LP-11) / 340-460 (LP-31T)
Input frequency range (Hz):  40-70
Input voltage (V):  220/230/240 (selected by user)
Output frequency (Hz):  50/60 Hz (± 0,1%)
Cross-factor:  5:1
Parallel operation:  up to 4 devices
Distortion of output voltage (THD) at linear load:  <1%
Distortion of output voltage (THD) at non-linear load:  <10% max. at cross-factor 2,5:1
Output voltage constancy at static load:  ±1%
Output voltage constancy at dynamic load (alternation – 0 -100-0%):  < ±2% (recovery time < 10ms)
Overload capability of inverter:  110% - 20 min. 130% - 3.5 min. 150% - 2 min.
Environment operating temperatu:  UPS: - 10 - + 40 ? C Battery: 15-25 ? C
Humidity:  95% without condensate
Safety standards:  EN 50091-1-1; EN/IEC 60950
EMC standard:  EN 50091-2
Standard interface:  RS232, dry-type contacts
Advances batteries control:  +
Options:  RPA, SNMP-card, additional battery enclosures
Specifications
  • Topology : VFI (voltage and frequency independent) I compliance with EN 62040-3
  • Technology: Booster IGBT Process
  • Operating modes: double conversion, automatic by-pass, frequency conversion, parallel operation up to 4 UPSes

LPX-11 = 1 phase at input/1 phase at output
LPX-31 = 3 phases at input/1 phase at output
Х = kVA nominal value
T = three-phase input transformer